Navigace

Cyberbond TT Pump Gel

The Clean Threadlocker for Every Tool Box

Cyberbond just started the relaunch of the very successful Pump Gel Dispenser. We offer

  • TT 44 Pump Gel blue (medium strength),
  • TT 62 Pump Gel red (high strength).

in round 35 g dispensers. The round version has got the advantage compared to the oval one that you are able to close the cap without touching the nozzle.

These products compete e.g. against AN Sticks. The disadvantage of these sticks is that with each application you bring contamination from the surface of the mating part onto the surface of the adhesive. This has a negative influence on the shelf life of the stick, unless you do not stabilise the product highly with the consequence of slow curing. The next problem is to find the right viscosity. The product is either too hard, then you apply too less or vice versa.

 
Cyberbond’s TT Pump Gel has got the following advantages:

  • product is absolutely easy to apply with only one hand
  • relative fast setting time
  • you empty the dispenser down to the last drop
  • product does not drip at all and
  • you have an absolute clean package when closed which keeps your tool box clean

 

 

TECHNICAL DATASHEET

 Cyberbond TT 44 Pump Gel

Threadlocker; medium strength, very high viscosity very high thixotropy
Anaerobic threadlocker perfect to be used for repair jobs; Applied by means of a dispenser; therefore very accurate and clean 

 

Physical properties

A. Monomer (fluid)

Monomer Base

Dimethacrylat

appearance

blue

viscosity cone/plate

20.000 –30.000
thixotrop

mPa*s

spec. gravity

1,12

g / cm3

fluorescent

shelf life*

* at room temperature in unopened bottles

12

months

Curing behaviour….

fast

strength, M10 steel bolt/nut, after

15 – 30

minutes

strength, M10 brass bolt/nut, after

< 30

minutes

maximum gap filling

adhesive bridging properties

maximum thread

0,10 – 0,30
M 50

mm

Final cure after

12

hours

B. Polymer (solid)

breakloose torque, free assembled, according to DIN 54454 (MLB)

13 – 22

mm

prevailing torque

< MLB

shear strength

following DIN 54452

9 – 15

N / mm2

temperature range (Polymer)

-50 / +150

°C

 

The data mentioned in this data sheet, particularly the recommendations for application and use of products are based on our recent knowledge and experience. Due to the fact of having so many different materials involved and conditions of applications which are out of our influence, we strongly recommend to do sufficient tests in order to guarantee that Cyberbond products are suitable for the intended process and applications. Except for wilful acts any liability based on such recommendations or any verbal advice is hereby expressly excluded.

revised: November 2007

 

 

 

TECHNICAL DATASHEET

 Cyberbond TT 62 Pump Gel

Threadlocker; high strength, very high viscosity very high thixotropy
Anaerobic threadlocker perfect to be used for repair jobs; Applied by means of a dispenser; therefore very accurate and clean 

 

Physical properties

A. Monomer (fluid)

Monomer Base

Dimethacrylat

appearance

red

viscosity cone/plate

9.600 –14.400
thixotrop

mPa*s

spec. gravity

1,12

g / cm3

fluorescent

shelf life*

* at room temperature in unopened bottles

12

months

Curing behaviour….

fast

strength, M10 steel bolt/nut, after

15 – 30

minutes

strength, M10 brass bolt/nut, after

< 30

minutes

maximum gap filling

adhesive bridging properties

maximum thread

0,10 – 0,30
M 50

mm

Final cure after

12

hours

B. Polymer (solid)

breakloose torque, free assembled, according to DIN 54454 (MLB)

22 – 37

mm

prevailing torque

< MLB

shear strength

following DIN 54452

15-25

N / mm2

temperature range (Polymer)

-50 / +150

°C

 

The data mentioned in this data sheet, particularly the recommendations for application and use of products are based on our recent knowledge and experience. Due to the fact of having so many different materials involved and conditions of applications which are out of our influence, we strongly recommend to do sufficient tests in order to guarantee that Cyberbond products are suitable for the intended process and applications. Except for wilful acts any liability based on such recommendations or any verbal advice is hereby expressly excluded.

revised: November 2007